crispy puffs snacks extruder-manufacture,factory,supplier from China

Advantages of Twin Screw Square Barrel ExtruderTwin-screw square barrel extruders are mainly used to produce various snacks and foods. Including puffed snacks, fried snacks, artificial rice, macaroni, etc.

The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust, friction, shear force and heat, a high pressure and high temperature difference is formed inside and outside the cavity. The moment the material is extruded, Instant expansion due to pressure difference.

Principles and Advantages of Puffed FoodPuffed food, also known as extruded food, exploding food, light food, etc., is a new type of food developed internationally in recent years. It uses grains, beans, potatoes, vegetables, etc. as raw materials, and is processed by puffing equipment to produce a wide variety of food with exquisite appearance, rich nutrition, crispy and delicious food. Therefore, a large category of food has been formed uniquely.

First of all, we take the production of aquatic feed as an example, according to the material and purpose of the expansion from the structure of the single screw extruder and twin screw extruder,In general:--- Single screw extruder: suitable for processing all kinds of raw materials and common livestock and poultry compound feed.--- Twin-screw expander: The final product requires good molding and beautiful appearance, uniform maturation and adjustable density of compound feeds (aquatic food and pet food) and high value-added raw materials (alpha starches and histones), etc.

Daily Troubleshooting of Twin-screw ExtruderThe twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw is rotated and extruded to be transported forward. Under the action of thrust, friction, shear force and heat, a high-pressure and high-temperature difference is formed inside and outside the cavity.

The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion CoefficientIn the aquatic feed industry, extruders are widely used. The reason is that the materials produced by extruders are diverse and their maturity is higher than that of pelletizers, which causes much less environmental pollution. Many manufacturers generally Only floating materials are produced. Things to note when using an extruder to produce submersible materials:1. Formula: When designing the formula, it should be noted that the starch content should be low but not absent.

The twin-screw extruder is a kind of multi-screw extruder. It is developed on the basis of the single-screw extruder. In the barrel of the twin-screw extruder, two screws are placed side by side. Therefore, it is called twin-screw extruder. According to the relative position of the screw, it can be divided into meshing type and non-meshing type. The meshing type can be divided into partial meshing type and full meshing type. According to the rotation direction of the screw, it can be divided into two types: co-rotating and counter-rotating.

Advantages of twin-screw extrusion extruder(1) The adaptability of raw materials is wider, and it can adapt to the processing of raw materials with high viscosity, low viscosity, high oil content, high moisture or viscosity, oily, very wet and other slippery materials in single screw (SSE).(2) There are fewer restrictions on the particle size of raw materials, which can be adapted to the processing of raw materials with a wide particle size or from fine powder to coarse powder particles and raw materials with particle sizes outside the specific range of single-screw processing.(3) The material

The breakfast cereal production line uses advanced puffing technology to instantly puff various cereal raw materials into crispy and nutritious breakfast cereals after high temperature and high pressure treatment. The entire production line consists of ingredients, mixing, puffing, drying, seasoning, cooling, packaging and other links. It has a high degree of automation and fast production efficiency.1 Ingredients: The ingredients of corn flakes are very important.

Common troubleshooting of twin-screw extruderThe twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw is rotated and extruded to be transported forward. Under the action of thrust, friction, shear force and heat, a high-pressure and high-temperature difference is formed inside and outside the cavity.