Modified Starch Making Extruder-manufacture,factory,supplier from China

Environmentally Friendly Degradable Material---Starch Based Packing FillersWith the increasing awareness of environmental protection, more and more people are paying attention to the issue of degradable materials. Today, let us learn about a new type of degradable material - starch-based, and see how it can become a perfect combination of environmental protection and practicality!What are starch-based degradable materials?Starch-based degradable material is a degradable material that uses starch as the main raw material and is processed through a specific process.

1. Adsorption properties and their applications (fillers)    Starch can be used as a diluent (or filler) in feed additive products to fill and disperse active ingredients in feed additive products to increase their weight or volume, facilitate formulation molding and dispersion, and further make powders , granules and pellets, etc.    When starch is used as diluent, corn starch is commonly used. It has very stable properties, does not work with most ingredients, and is relatively cheap. It has low hygroscopicity and good appearance and color.

The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust, friction, shear force and heat, a high pressure and high temperature difference is formed inside and outside the cavity. The moment the material is extruded, Instant expansion due to pressure difference.

Low starch puffing technologyThis article introduces a new type of low-starch extruded fish feed, which can meet the nutritional needs of fish growth and at the same time improve the quality and taste of fish meat. Compared with traditional fish feed, low-starch extruded fish feed has higher nutritional value and lower cost, making it a new choice for healthy breeding.1. Traditional fish feed issuesTraditional fish feed mainly uses starch as the main raw material, but excessive starch content will lead to a decline in fish meat quality and poor taste.

Starch is the main source of carbohydrates in animal feed, which can provide energy requirements for animal growth.Starch can be used as a diluent (or filler) in feed additive products to fill and disperse active ingredients in feed additive products to increase their weight or volume, facilitate formulation molding and dispersion, and further make powders , granules and pellets, etc.When starch is used as diluent, corn starch is commonly used. It has very stable properties, does not work with most ingredients, and is relatively cheap. It has low hygroscopicity and good appearance and color.

Wheat Bran Puffing Snack Making MachineWheat bran, a by-product of wheat flour processing, is yellow, flaky or powdery. There is part of the germ (that is, the part where the wheat sprouts) at the end of the wheat hull, accounting for about 5-10% of the total wheat hull. About 1/3-1/2 of the wheat hull has gone into the flour. The total wheat hull is Divided into 6 layers, the outer 5 layers contain more crude fiber, less nutrients, and are difficult to digest. Wheat hulls contain large amounts of B vitamins.

The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion CoefficientIn the aquatic feed industry, extruders are widely used. The reason is that the materials produced by extruders are diverse and their maturity is higher than that of pelletizers, which causes much less environmental pollution. Many manufacturers generally Only floating materials are produced. Things to note when using an extruder to produce submersible materials:1. Formula: When designing the formula, it should be noted that the starch content should be low but not absent.

Processing Technology of Puffed Instant Yam Powder01Mixing machine: Add nutritional additives and a certain proportion of water to the raw materials and mix them evenly.02Feeding machine: transports the mixed raw materials to the feeding hopper of the extruder.03Extruder: It is produced using the world's most advanced twin-screw extruder, which allows the starch granules to expand and refine during the puffing process of yam at high temperature, high pressure, and high shear force, and the starch molecular chains open, increasing the surface area of the food particles.

The extruder is mainly composed of a barrel and a screw rotating in the extruder barrel, there are single screw extruder and twin screw extruder two categories. In the process of extrusion processing, the material from the feeding port into the die cavity, driven forward by the screw conveyor, by extrusion, mixing, compression and shear. Due to the driving force, friction and shear force and the effect of external heating, the material becomes heated under pressure, reaching the high temperature and high pressure state, and becomes a modified paste.

First of all, we take the production of aquatic feed as an example, according to the material and purpose of the expansion from the structure of the single screw extruder and twin screw extruder,In general:--- Single screw extruder: suitable for processing all kinds of raw materials and common livestock and poultry compound feed.--- Twin-screw expander: The final product requires good molding and beautiful appearance, uniform maturation and adjustable density of compound feeds (aquatic food and pet food) and high value-added raw materials (alpha starches and histones), etc.